Basement Watchdog Pump Was Activated Alarm

Everything You Need to Know About Basement Watchdog Pump Was Activated Alarm

A basement watchdog pump is a crucial device that helps protect your home from flooding. It is designed to automatically pump out water from your basement in the event of a power failure or other emergency. The pump is powered by a battery backup, so it can continue to operate even when the power is out.

One of the most important things to know about your basement watchdog pump is how to reset the alarm. The alarm will sound when the pump has been activated, and it is important to reset it as soon as possible to prevent the pump from running continuously.

How to Reset the Alarm

To reset the alarm, simply follow these steps:

1. Locate the alarm on the pump. It is usually a small red button. 2. Press and hold the alarm button for 5 seconds. 3. The alarm will stop sounding and the pump will reset.

What to Do if the Alarm Keeps Sounding

If the alarm keeps sounding, it may indicate a problem with the pump or the sump basin. Here are some possible causes:

* The pump is not properly sized for the sump basin. * The pump is clogged with debris. * The sump basin is cracked or damaged. * The power supply to the pump is interrupted. * The battery backup is dead.

If you are unable to resolve the problem yourself, it is important to call a qualified plumber for assistance.

Tips for Maintaining Your Basement Watchdog Pump

To ensure that your basement watchdog pump is always working properly, it is important to follow these maintenance tips:

* Inspect the pump monthly for any signs of damage or wear. * Clean the pump and sump basin regularly to remove debris. * Test the pump annually by pouring water into the sump basin and making sure that the pump turns on and pumps out the water. * Replace the battery backup every 2-3 years.

By following these tips, you can help ensure that your basement watchdog pump will be there to protect your home from flooding for many years to come.